Lachie's 4th party

When Lachie turned 4 I promised myself that I would just do a super simple party... NO decorations, easy catering (actually, that's pretty normal for me... I'm not much into cooking), NO crazy amount of sewing or crafty stuff!!! BUT... I just had to slip a few things in... ;)

Here is some super easy felt bunting I made for the party. It was really simple to make. I used one row of stitching at the top to create a casing, then used some cord to slip through the top of each piece and then tied a knot in between each piece to stop it sliding together and bunching up. I love how clean and fresh it looks. :)

the all important food table :)

The invites

I made some lego frames to decorate the food table with. I used one of them to frame the 'menu' that Lachie had chosen. :)

I also made some fondant letters and numbers. I used maybe about one tenth of the ones made... estimation FAIL!!!

more frames

Lachie wanted some "huuuuge biscuits" at his party. It's hard to see by these photos but they are actually the size of a small child's head!! ;)

The obligatory fairy bread pic!

He wanted a "black cake with smarties". Sweeet... how easy is that!?!?! I plonked the cake on a lego board and got Tim to write "Lachie" in lego (yes, I'm a bit 'challenged' when it comes to lego creations).

Lastly, a pic of my precious boy!! :)

Ok, that's all!

Kerryn

Tutorial - Pinwheel and glass bottle decorations

Ok, as I mentioned in my last post, I used stacks of pinwheels for Adele's 1st party. If you missed my tutorial on how to make a basic fabric pinwheel then just click here.

Here is one way that I used my stash of pinwheels...

I used these babies as table decorations. Read on to find out how... :)

Supplies...

Pre-made pinwheels
bamboo skewers or wooden dowel
spray paint
polystyrene board
hot glue gun
variety of glass bottles
fabric scraps
sand

Ok... lets go...

Step 1 - stick your bamboo skewers or wooden dowel into the polystyrene board and spray paint. You'll probably need a few coats. Better to do lots of light coats than have one gluggy coat with lots of runs going down the skewer. :)

Step 2 - choose your bottles. I used  maple syrup bottle, Vietnamese dipping sauce bottle & boiled lollie bottles. Remove labels and any sticky residue. I used tea tree oil. Clean the bottles up and give them a spray paint.

Step 3 - tie some scrap fabric round the top to cover the screw top thread. This makes the bottle look less 'homemade'.

Step 4 - use your hot glue gun to glue the bamboo skewers to the back of your pinwheels.



 Step 5 - fill your bottles with sand and poke in your skewers with pinwheels...

Tada...



See you next time for my next pinwheel tutorial... :)

Kerryn

Tutorial - Fabric Pinwheels

Pinwheels... Is there anything more delightful?!?!? I must have made 1000 different type of pinwheels for Adele's party last weekend. I used them for the invitations, decorations, hair clips & cupcake toppers. So I thought I'd write a tutorial for a basic fabric pinwheel. This is my very first tutorial so please let me know if it's helpful. :)

So... here goes...

Supplies...

scrap fabric

fusible webbing

buttons

thread

needle

cardboard

iron

fabric scissors

My fave scraps and roll of fusible webbing

Step 1 - cut out a paper/cardboard square the size you want your pinwheel to be. I used a lot of different sizes so cutout a lot of different sized squares from 4cm by 4cm to 12cm by 12cm.

Step 2 - cutout a square of fusible webbing slightly larger than the size of the cardboard square you have chosen.

Step 3 - Fusible side down iron the webbing onto the wrong side of your fabric.

Step 4 - cut fabric out around the webbing.

Step 5 - peel paper backing off webbing. Webbing should be fully fused to the fabric.



Step 6 - Iron squares, webbing side down, onto wrong side of coordinating fabric.



Step 7 - get out your square pattern pieces and cut your squares.

Step 8 - cut 4 diagonal lines starting from each corner of the square and ending halfway to the middle (doesn't have to be too specific, so don't stress).

Step 9 - get your needle and thread out, it's time to sew. :) Tie a knot in the end of your thread and take your needle through the centre of the pinwheel. Start with one corner of the pinwheel. Take one of the points and sew it to the centre of the pinwheel.

Step 10 - Take your needle up through the centre of the pinwheel again, through the first point (this helps to anchor it down).

Step 11 - Repeat for point 2.

Step 12 - Repeat for point 3 and 4.

Step 13 - Sew your button to the centre.

Tada... a perfect pinwheel. :)

In the next few days I'm going to be putting up some more tutorials that use this basic pinwheel. So if you love these little babies and would like to use them on some sweet projects then pop back and have a look.

Here's a sneak peek...

hair clips

decorations

Pinwheel invites

Ok, I hope this helps. Happy pinwheeling... :)

Kerryn  

Sweets Adele's 1st Birthday party

Tim and I are so thankful for our two precious children and yesterday we celebrated ONE year of life with our sweet Adele. We have had some pretty average weather here in Sydney, Australia but we were blessed with a beautiful day! :)

I have been planning Adele's party for over 2 months. My theme and colours were decided when I found the most divine fabric online. I nearly fell off my chair when I saw it... DIVINE!!! It went straight into my online cart... I bought the fabric from Hawthorne Threads which is an American based website. The fabric range is Children at Play  by Sarah Jane. So lovely!! :) After finding my fabric my theme was decided... Pennants and Pinwheels!! Hoorah! As for colours... Aqua, pinks and white. nice, clean and fresh... and most importantly not super girly!

I sourced a few other 'must haves' online and the rest was... well... handmade. :)

I am planning on posting tutorials and more detailed pictures for most of the things I have made. So take a look back in the next few weeks if you're keen for more details.

Ok... here's some pics...

THE table. It turned out just like i saw it in my head! Don't you love that!! :)

With food

Pinwheels in spray painted glass bottles and spray painted frames filled with some of my favourite fabric. :) 

I bought these gorgeous tiny buckets online for gift for the women. I added the pennants to match the theme of the party and filled the buckets with chocolate. :)

The 'lemonade stand' was one of my favourite parts of the party. My Mum and I made lemonade and I bought vintage bottles and paper straws. I love the 'lemonade' bunting too!! :) The box was an ugly folk art painted pine box which I took apart, sanded back and painted. The jug actually sat inside the box but I didn't get a pic of that.

I made some cute little fondant pinwheels for the cupcakes. :)

The cake! This was my 3rd different sized bunting and by far the cutest. So tiny! :) Tim actually iced the cake. I got a bit over it and he took over. How wonderful is he!! :)

She's excited! baby LOVES cake!! :)

Happy birthday sweet one!

LOVE LOVE LOVE this sweet girl!!

I made her a little pinwheel hair clip to go with her dress that I had made earlier. I also made these hair clips for all the girls who came to the party. More pics to come. :)

Me and my family! love THESE 3 people!!

I had to add this photo! We did the cake early so that we could let her go wild and get dirty... and she did. :)

Ok... so, I'd love to hear what you think of the party. It was 2 months in the making and over in 2 hours. Haha... so worth it. :)

Pop back soon for some more detailed pics and some tutorials.

See ya...

Kerryn